English
Home / Products / Relays / Solid State Relays / SOLID STATE RELAYS-HHG1A-1

NEW ARRIVALS

SOLID STATE RELAYS-HHG1A-1

Availability:

CHARACTERISTICS

HHG1A-1(SSR-DA)

Controlling Voltage 014:3-14VDC,032:3-32VDC
Controlling Current 5-25mA
Make-on Voltage 3VDC
Break-off Voltage 1VDC
Reverse Voltage 32VDC
Load Voltage 38:40-440VAC


Load Current 60A ~ 150A, 200A ~ 350A
Instant Voltage 38:1200VAC
Voltage Dropin On <1.6VAC

On-off Time ≤10mS
Leakage Current in off ≤10mA
Dielectric  Strength ≥2500VAC
Insulation Resistance 500MΩ(at 500VDC)
Ambient Temp. -30~80℃
Weight ≈135g(60-150A);≈235g(200-350A



Indicate Methods Led

94X25X36.2mm(LxWxH) for 60-

150A, 94x34x43(LxWxH)mm for
Dimensions 200-350A.
Wirinig Diagram See Page-2

ORDERING INFORMATION

f8dee285 1.Series: HHG1A-1 series(SSR-DA)
2.ControllingVoltage: 014:3-14VDC,032:3-32VDC.
3. Load Voltage : 38:40-440VACLoad current : Small size 60A,80A,100A,120A,150A;
4.Big size:200A, 250A, 300A, 350A.400A

DIMENSIONS (Unit: mm)

                                                     60A-150A

ngy7

Remarks:
1.Input power must be DC Voltage and Output power must be AC Voltage.
2.Please make correct polarity connection for input and output power.
3.If the SSR with load above 10Amps,it must be mounted onto heat sink.It should be mounted onto fan-cooling or
water-cooling if the load above 80Amps.
4.It is zero-cross type.




Previous: 
Next: 
Leave Your Message

CONTACT US

    No.1 Jindi Road,Ruile Block, Beicun
        Industrial Zone,Wutian,Ouhai,Wenzhou
        China
   0086-577-8608 7887
  0086-577-8608 7887
   ncrindustrial
Leave a Message
Leave Your Message
© Copyright - 2018-2022 : All Rights Reserved.