 |
FEATURES
●Uilized 40P MIL connector as input port, which can directly corresponding to input/output module of Mitsubishi Q PLC.
●Through point to point connect with PLC and terminal blocks and no need any special connect lines Each signal takes along with LED lights to make wiring easier and visible;
●Miniaturization design Neat wiring cabinet
Note
●Before ordering, please confirm the load type and size, choose the suitable way to control.
●When PLC connection, please be sure to use the company developed and the corresponding special cable.
RELATED PRODUCTS | |
Suitable cable | X210-5 |
SPECIFICATIONS
INPUT | |
●Nominal operating current | 1A |
●Nominal coil voltage | DC 24V |
PLC SUITABLE PLC
MITSUBISHI | NPN:L02CPU |
L26CPU-BT | |
PNP:L02CPU-P | |
L26CPU-PBT |
SUITABLE WIRE
Stripping length: 6mm 1.5mm2 Following /AWG16 |
|
DIMENSIONS
WIRING DIAGRAM
FEATURES
●Uilized 40P MIL connector as input port, which can directly corresponding to input/output module of Mitsubishi Q PLC.
●Through point to point connect with PLC and terminal blocks and no need any special connect lines Each signal takes along with LED lights to make wiring easier and visible;
●Miniaturization design Neat wiring cabinet
Note
●Before ordering, please confirm the load type and size, choose the suitable way to control.
●When PLC connection, please be sure to use the company developed and the corresponding special cable.
RELATED PRODUCTS | |
Suitable cable | X210-5 |
SPECIFICATIONS
INPUT | |
●Nominal operating current | 1A |
●Nominal coil voltage | DC 24V |
PLC SUITABLE PLC
MITSUBISHI | NPN:L02CPU |
L26CPU-BT | |
PNP:L02CPU-P | |
L26CPU-PBT |
SUITABLE WIRE
Stripping length: 6mm 1.5mm2 Following /AWG16 |
|
DIMENSIONS
WIRING DIAGRAM
